IoT Cold Chain and Energy Monitoring: LoRaWAN, NB-IoT and MQTT in Practice

ApexlyTech Team 7 min read
IoT Cold Chain and Energy Monitoring: LoRaWAN, NB-IoT and MQTT in Practice

In short: An IoT cold chain monitoring system puts calibrated temperature sensors in cold rooms, fridges and vehicles, sends readings over LoRaWAN, NB-IoT, Wi-Fi or cellular links, raises an alarm when a reading leaves its range and keeps the records an inspector will ask for. Pharmaceutical distributors in Pakistan and Saudi Arabia have specific rules: DRAP's cold chain guideline asks for continuous monitoring recorded at least six times an hour, and the SFDA asks for records kept for the product's shelf life plus one year. The same sensors and network can also measure the energy your refrigeration uses, which is often where the cost case is made. This guide is for operations, quality and finance heads planning a system.

Key takeaways

  • DRAP's Guidelines for Good Cold Chain Management Practices (effective 3 May 2023) set monitoring sensors accurate to 0.5 °C, a minimum recording frequency of six times per hour, yearly calibration and alarm checks at least every six months.
  • The SFDA's Good Storage and Distribution Practices guideline (version 2.1, February 2024) asks for temperature mapping, regularly calibrated alarms on fridges and freezers, transport devices that can link to the authority's systems, and records kept for shelf life plus one year.
  • Pakistan's PTA framework for short range devices and IoT (version 1.4, December 2025) licenses LPWAN operators, requires gateway registration and needs PTA permission to store data outside Pakistan.
  • LoRaWAN suits sensors spread across a site; NB-IoT and LTE-M suit scattered sites and vehicles; Wi-Fi suits small sites with good coverage. Many systems mix them.
  • MQTT, an OASIS standard, is the usual way to carry readings from gateways to the platform.

What is IoT cold chain monitoring?

Cold chain monitoring tracks the temperature, and often humidity, of products that must stay within a range, such as vaccines and insulin at 2 to 8 °C, frozen food, dairy and fresh produce, from the warehouse to the vehicle to the shop or pharmacy. IoT replaces paper logs and stand-alone data loggers with sensors that report continuously, so a problem is found while the product can still be saved, not at the next manual check.

This guide is written by the ApexlyTech team at Apexly Technologies (Pvt) Ltd, which builds IoT platforms, dashboards and mobile apps for businesses in Pakistan, the Gulf and elsewhere.

What do DRAP and the SFDA expect?

TopicDRAP (Pakistan)SFDA (Saudi Arabia)
MonitoringContinuous recording preferred; minimum six readings per hour per sensor positionDevices placed by location and height according to the approved temperature mapping
Accuracy and calibrationElectronic sensors accurate to 0.5 °C; calibrated against a traceable standard at least yearlyDevices calibrated regularly
AlarmsHigh and low alarms; SMS or phone alerts to on-call staff out of hours preferred; alarms checked at least every six monthsAlarms on fridges and freezers that trigger on rises and falls, calibrated regularly
TransportCalibrated transport monitoring devicesElectronic devices in vehicles or containers, able to link to the authority's systems, active from dispatch to arrival
RecordsRecords kept to show complianceKept for the product's shelf life plus one year and available to the SFDA

DRAP's guideline applies to manufacturers, importers, distributors, transporters and sale outlets handling time and temperature sensitive drug products, and it also asks for fridges and cold rooms to be connected to backup power. Food businesses follow different rules, but the same monitoring design serves both. Read the full documents for your own case; this table is a summary.

Choosing the connectivity

OptionStrengthsWatch out for
LoRaWANLong range on one site, battery life of years, your own gatewayFrequency plan and licensing per country; metal cold-room walls weaken signals
NB-IoT and LTE-MNo gateway; works across many sites and in vehiclesOperator coverage and roaming; recurring SIM costs
Wi-FiUses existing network; high data ratesHigher power use; depends on IT network uptime
Bluetooth data loggersCheap, simple, good for shipmentsData arrives only when a phone or gateway is near

For LoRaWAN, The Things Network's country table lists Saudi Arabia, the UAE and Bahrain under the EU863-870 plan, but lists no plan for Pakistan, where the PTA's IoT framework sets the bands and the LPWAN licence. Confirm frequencies with the regulator (PTA, CST in Saudi Arabia, TDRA in the UAE) before buying devices. NB-IoT was standardised by 3GPP in Release 13; ask each operator for a coverage test at your actual sites.

A reference architecture

  1. Sensors with probes placed at the hot and cold spots found by temperature mapping, buffered memory so readings survive a network outage, and a calibration certificate.
  2. Gateways or SIMs on backup power, with a battery that outlasts your longest power cut.
  3. An MQTT broker that receives readings over TLS, with a separate identity per device. MQTT 5.0 has been an OASIS standard since March 2019.
  4. A time-series database that stores every reading unchanged, with an audit trail for any annotation.
  5. An alarm engine with delays that ignore a door opening but catch a failing compressor, and escalation by SMS, call and WhatsApp until someone acknowledges.
  6. Dashboards and reports that produce the excursion report, calibration list and record extract an inspector asks for in minutes.

Our industrial IoT architecture guide covers device identity, firmware updates and network segmentation in more depth.

Add energy monitoring to the same system

Refrigeration is often a large share of a cold store's or kitchen's electricity use. Adding energy meters on the main board and current sensors on compressors to the same IoT network gives you:

  • Energy per site and per cold room, so you can compare similar sites fairly.
  • Compressor run time, which rises before a failure as a unit struggles, giving maintenance time to act.
  • Door-open time, from door sensors, which drives both temperature excursions and energy use.
  • Generator and solar output, to check that backup power covers cold rooms during outages.

Most commercial energy meters speak Modbus, which a gateway can translate to MQTT. Start by measuring for a month before setting targets; the data usually shows which sites, units or habits cost the most.

What drives the cost?

The main costs are sensors and probes, calibration, gateways or SIM plans, the platform, and installation work in cold rooms and vehicles. Costs rise with the number of monitoring points, the need for vehicle tracking and the reporting your regulator or customers require. Savings come from stock not lost to an unnoticed failure, fewer manual checks, lower energy use and faster audits. Price a pilot on one site and a few vehicles before a full roll-out.

How ApexlyTech can help

We design and build IoT monitoring platforms, from sensor selection and MQTT ingestion to alarm escalation, compliance reports and mobile apps for on-call staff, and connect them to your ERP or warehouse system. See our IoT solutions and web applications services, or contact us to plan a pilot site.

Frequently asked questions

How often must cold chain temperatures be recorded in Pakistan?

DRAP's Guidelines for Good Cold Chain Management Practices, effective 3 May 2023, set a minimum recording frequency of six times per hour for each sensor position in temperature-controlled storage, with electronic sensors accurate to 0.5 °C and calibrated at least once a year.

How long must temperature records be kept in Saudi Arabia?

The SFDA's Good Storage and Distribution Practices guideline says temperature and humidity records for transported and received pharmaceuticals should be kept for the product's shelf life plus one year, and monitoring records should be available for SFDA inspection.

Should we use LoRaWAN or NB-IoT for temperature sensors?

Use LoRaWAN when many sensors sit on one site and you can install your own gateway; use NB-IoT or LTE-M for scattered sites and vehicles where a gateway is impractical. Check the frequency plan and licensing with the regulator, and test signal inside metal cold rooms.

Can IoT data be stored in the cloud outside Pakistan?

According to TUV Rheinland's summary of the PTA's IoT framework version 1.4, storing data outside Pakistan requires prior PTA permission. Plan for in-country hosting or obtain permission, and check sector rules such as DRAP's for pharmaceutical records.

Can the same system monitor energy use?

Yes. Energy meters and current sensors on compressors can report over the same network and MQTT broker as temperature sensors. Combining both shows energy per site, compressor run time and door-open time, which helps cut electricity costs and predict refrigeration failures.

Sources

All sources checked 10 November 2026.